Lobb Humidifier Parts - Humidifier Filters.com

Models for Lobb parts

Previous | Next

	Lobb Ad1 :
	Parts available for this model:
	100 - Cover - more info	$25.75
	101 - Main case - more info	$33.00
	103 - Side cover plate - more info	$14.99
	103-A - Side cover plate clip - more info	$4.32
	109 - Motor mounting screw. no longer available out use kit lob132 - more info	$0.00
	112 - Terminal knurled nut nla - more info	$0.00
	113 - Terminal hex nut nla - more info	$0.00
	116 - Main case mounting screw nla - more info	$0.00
	126 - Drum stop washer no longer available subs to 131 drum kit - more info	$0.00
	127 - Bearing bar hex nut. this nut is no longer available. need to purchase from local hardware store. - more info	$0.00
	129 - Bearing bar screw. this screw is no longer available. need to purchase from local hardware store. - more info	$0.00
	131 - Drum assembly with shaft, 2 timmerman clips and drum stop washer - more info	$49.99
	135 - Saddle valve assembly nla - more info	$0.00
	143 - Float valve adjusting screw - more info	$0.75
	146 - Float valve orfice for lobb - more info	$2.40
	147 - Float valve fiber washer. this part is no longer available and we have none in stock. new float kit lobb188 does not require it. replaced by lobb188 - more info	$0.00
	148 - Float valve jam nut nla - more info	$0.00
	150 - 34 cotter pin nla - more info	$0.00
	151 - 1 cotter pin. not available purchase from local hardware store - more info	$0.00
	152 - Uncrimped collar 7 - more info	$3.15
	155 - Crimped collar 7 - more info	$3.15
	156 - Transformer - more info	$32.25
	157 - Humidistat - more info	$36.87
	201 - Main case. this comes with bearing bar part number 128. bearing bar cannot purchase seperately. - more info	$29.99
	EM260 - Motor for media wheel - more info	$26.40
	LOB114 - Drum support bracket - more info	$14.99
	LOB132 - Motor 24 volt - more info	$39.99
	LOBB102 - Reservoir pan. if one has a pan with drain plug this is the replacement. this pan no longer comes with a drain plug. if drain plug is leaking replace pan (recommended) or us new pan liner (part #169) (this is not recommended-but might work). limit stock on this pan lobb102 going no longer available when out of stock. - more info	$39.99
	LOBB111 - Mounting nuts - more info	$0.50
	LOBB188 - Water feed valve assy kit includes 149 rubber grommet and 146 float valve orfice which are not available seperately. this replaces water feed valve assembly 170 and 171. no longer comes with brass treads, now plastic. - more info	$38.70
	View all our filters and parts for this model

	Lobb Ft20 :
	Parts available for this model:
	135 - Saddle valve assembly nla - more info	$0.00
	156 - Transformer - more info	$32.25
	157 - Humidistat - more info	$36.87
	410 - Base. please email for price - more info	$0.00
	411 - Cover. please email for price - more info	$0.00
	414 - Drain tray. please email for price - more info	$0.00
	415 - Nozzle. please email for price - more info	$0.00
	424A - Filter and frame - more info	$36.00
	426 - Ft20 solenoid - more info	$48.99
	427 - Fitting. please email for price - more info	$0.00
	428 - Fitting. please email for price - more info	$0.00
	429 - Supply tubing (5 ft). please email for price - more info	$0.00
	430 - Nut. please email for price - more info	$0.00
	431 - Compression clamp 1/2 in diameter. please email for price - more info	$0.00
	432 - Drain tubing. this part is no longer sold by lobb email with size and length or get from local hardware store. - more info	$0.00
	451 - Collar - more info	$4.17
	LOBB450 - Damper. sorry this part is no longer available and we have none in stock. - more info	$0.00
	View all our filters and parts for this model

	Lobb Healthiaire :
	Parts available for this model:
	126 - Drum stop washer no longer available subs to 131 drum kit - more info	$0.00
	254 - 6 x 25 flex duct nla - more info	$0.00
	701 - 6.00 dia starting collar - more info	$3.15
	702 - 6.00 dia starting collar and damper - more info	$7.50
	703 - Collar for 6.00 dia pipe - more info	$4.38
	704 - Feed line - more info	$0.36
	708 - Drip valve assy. 2 gal. per hour (not adjustable) - more info	$25.80
	709 - 12 x 12 ployethylene elbow black nla - more info	$0.00
	712 - Phillps mach screw nla - more info	$0.00
	713 - Hex nut nla - more info	$0.00
	730 - Pan liner - more info	$13.50
	801 - Cabinet - more info	$30.00
	802 - Side cover plate - more info	$9.38
	806-T - Distribution tray assy - more info	$28.50
	821 - Brass insert nla - more info	$0.00
	825 - Compression union nla - more info	$0.00
	832 - Brass compression nut nla - more info	$0.00
	836 - Plastic furrule nla - more info	$0.00
	870 - Hex head sheet metal screw nla - more info	$0.00
	LOBB721 - 8 sheet metal screw - more info	$0.15
	LOBB800 - Cover - more info	$30.00
	LOBB820 - Cover retainer clip nla - more info	$0.00
	View all our filters and parts for this model

	Lobb Wa1 :
	Parts available for this model:
	100 - Cover - more info	$25.75
	101 - Main case - more info	$33.00
	103 - Side cover plate - more info	$14.99
	103-A - Side cover plate clip - more info	$4.32
	109 - Motor mounting screw. no longer available out use kit lob132 - more info	$0.00
	112 - Terminal knurled nut nla - more info	$0.00
	113 - Terminal hex nut nla - more info	$0.00
	116 - Main case mounting screw nla - more info	$0.00
	126 - Drum stop washer no longer available subs to 131 drum kit - more info	$0.00
	127 - Bearing bar hex nut. this nut is no longer available. need to purchase from local hardware store. - more info	$0.00
	129 - Bearing bar screw. this screw is no longer available. need to purchase from local hardware store. - more info	$0.00
	131 - Drum assembly with shaft, 2 timmerman clips and drum stop washer - more info	$49.99
	135 - Saddle valve assembly nla - more info	$0.00
	136 - Saddle valve assy kit - more info	$9.99
	143 - Float valve adjusting screw - more info	$0.75
	146 - Float valve orfice for lobb - more info	$2.40
	147 - Float valve fiber washer. this part is no longer available and we have none in stock. new float kit lobb188 does not require it. replaced by lobb188 - more info	$0.00
	148 - Float valve jam nut nla - more info	$0.00
	150 - 34 cotter pin nla - more info	$0.00
	151 - 1 cotter pin. not available purchase from local hardware store - more info	$0.00
	152 - Uncrimped collar 7 - more info	$3.15
	155 - Crimped collar 7 - more info	$3.15
	156 - Transformer - more info	$32.25
	157 - Humidistat - more info	$36.87
	169 - Plastic pan liner - more info	$6.99
	201 - Main case. this comes with bearing bar part number 128. bearing bar cannot purchase seperately. - more info	$29.99
	LOB114 - Drum support bracket - more info	$14.99
	LOB132 - Motor 24 volt - more info	$39.99
	LOBB102 - Reservoir pan. if one has a pan with drain plug this is the replacement. this pan no longer comes with a drain plug. if drain plug is leaking replace pan (recommended) or us new pan liner (part #169) (this is not recommended-but might work). limit stock on this pan lobb102 going no longer available when out of stock. - more info	$39.99
	LOBB111 - Mounting nuts - more info	$0.50
	LOBB117 - Flush arm. sorry this item is no longer available. - more info	$0.00
	LOBB188 - Water feed valve assy kit includes 149 rubber grommet and 146 float valve orfice which are not available seperately. this replaces water feed valve assembly 170 and 171. no longer comes with brass treads, now plastic. - more info	$38.70
	View all our filters and parts for this model

	Lobb Wa1700 :
	Parts available for this model:
	103-A - Side cover plate clip - more info	$4.32
	109 - Motor mounting screw. no longer available out use kit lob132 - more info	$0.00
	112 - Terminal knurled nut nla - more info	$0.00
	113 - Terminal hex nut nla - more info	$0.00
	116 - Main case mounting screw nla - more info	$0.00
	126 - Drum stop washer no longer available subs to 131 drum kit - more info	$0.00
	135 - Saddle valve assembly nla - more info	$0.00
	136 - Saddle valve assy kit - more info	$9.99
	143 - Float valve adjusting screw - more info	$0.75
	146 - Float valve orfice for lobb - more info	$2.40
	147 - Float valve fiber washer. this part is no longer available and we have none in stock. new float kit lobb188 does not require it. replaced by lobb188 - more info	$0.00
	148 - Float valve jam nut nla - more info	$0.00
	151 - 1 cotter pin. not available purchase from local hardware store - more info	$0.00
	156 - Transformer - more info	$32.25
	157 - Humidistat - more info	$36.87
	201 - Main case. this comes with bearing bar part number 128. bearing bar cannot purchase seperately. - more info	$29.99
	202 - Water pan - more info	$29.99
	203 - Side cover plate - more info	$8.50
	231 - Drum assy wa1700 or wa2 - more info	$43.00
	254 - 6 x 25 flex duct nla - more info	$0.00
	254-5 - Flex duct 5 feet - more info	$0.00
	255 - Crimp collar - more info	$4.52
	267 - Pan liner replaces 269 - more info	$13.50
	279 - Pan screw. this part is no longer sold. one must purchase a local hardware store. - more info	$0.00
	280 - Thumb nut - more info	$3.99
	LOB114 - Drum support bracket - more info	$14.99
	LOB132 - Motor 24 volt - more info	$39.99
	LOB200 - Cover - more info	$17.99
	LOBB111 - Mounting nuts - more info	$0.50
	LOBB117 - Flush arm. sorry this item is no longer available. - more info	$0.00
	LOBB188 - Water feed valve assy kit includes 149 rubber grommet and 146 float valve orfice which are not available seperately. this replaces water feed valve assembly 170 and 171. no longer comes with brass treads, now plastic. - more info	$38.70
	View all our filters and parts for this model

	Lobb Wa2 :
	Parts available for this model:
	103-A - Side cover plate clip - more info	$4.32
	109 - Motor mounting screw. no longer available out use kit lob132 - more info	$0.00
	112 - Terminal knurled nut nla - more info	$0.00
	113 - Terminal hex nut nla - more info	$0.00
	116 - Main case mounting screw nla - more info	$0.00
	126 - Drum stop washer no longer available subs to 131 drum kit - more info	$0.00
	135 - Saddle valve assembly nla - more info	$0.00
	136 - Saddle valve assy kit - more info	$9.99
	143 - Float valve adjusting screw - more info	$0.75
	146 - Float valve orfice for lobb - more info	$2.40
	147 - Float valve fiber washer. this part is no longer available and we have none in stock. new float kit lobb188 does not require it. replaced by lobb188 - more info	$0.00
	148 - Float valve jam nut nla - more info	$0.00
	151 - 1 cotter pin. not available purchase from local hardware store - more info	$0.00
	156 - Transformer - more info	$32.25
	157 - Humidistat - more info	$36.87
	201 - Main case. this comes with bearing bar part number 128. bearing bar cannot purchase seperately. - more info	$29.99
	202 - Water pan - more info	$29.99
	203 - Side cover plate - more info	$8.50
	231 - Drum assy wa1700 or wa2 - more info	$43.00
	254 - 6 x 25 flex duct nla - more info	$0.00
	254-5 - Flex duct 5 feet - more info	$0.00
	255 - Crimp collar - more info	$4.52
	267 - Pan liner replaces 269 - more info	$13.50
	279 - Pan screw. this part is no longer sold. one must purchase a local hardware store. - more info	$0.00
	280 - Thumb nut - more info	$3.99
	LOB114 - Drum support bracket - more info	$14.99
	LOB132 - Motor 24 volt - more info	$39.99
	LOB200 - Cover - more info	$17.99
	LOBB111 - Mounting nuts - more info	$0.50
	LOBB117 - Flush arm. sorry this item is no longer available. - more info	$0.00
	LOBB188 - Water feed valve assy kit includes 149 rubber grommet and 146 float valve orfice which are not available seperately. this replaces water feed valve assembly 170 and 171. no longer comes with brass treads, now plastic. - more info	$38.70
	View all our filters and parts for this model

	Lobb Wa2700 :
	Parts available for this model:
	100 - Cover - more info	$25.75
	101 - Main case - more info	$33.00
	103 - Side cover plate - more info	$14.99
	103-A - Side cover plate clip - more info	$4.32
	109 - Motor mounting screw. no longer available out use kit lob132 - more info	$0.00
	112 - Terminal knurled nut nla - more info	$0.00
	113 - Terminal hex nut nla - more info	$0.00
	116 - Main case mounting screw nla - more info	$0.00
	126 - Drum stop washer no longer available subs to 131 drum kit - more info	$0.00
	127 - Bearing bar hex nut. this nut is no longer available. need to purchase from local hardware store. - more info	$0.00
	129 - Bearing bar screw. this screw is no longer available. need to purchase from local hardware store. - more info	$0.00
	131 - Drum assembly with shaft, 2 timmerman clips and drum stop washer - more info	$49.99
	135 - Saddle valve assembly nla - more info	$0.00
	136 - Saddle valve assy kit - more info	$9.99
	143 - Float valve adjusting screw - more info	$0.75
	146 - Float valve orfice for lobb - more info	$2.40
	147 - Float valve fiber washer. this part is no longer available and we have none in stock. new float kit lobb188 does not require it. replaced by lobb188 - more info	$0.00
	148 - Float valve jam nut nla - more info	$0.00
	150 - 34 cotter pin nla - more info	$0.00
	151 - 1 cotter pin. not available purchase from local hardware store - more info	$0.00
	152 - Uncrimped collar 7 - more info	$3.15
	155 - Crimped collar 7 - more info	$3.15
	156 - Transformer - more info	$32.25
	157 - Humidistat - more info	$36.87
	169 - Plastic pan liner - more info	$6.99
	201 - Main case. this comes with bearing bar part number 128. bearing bar cannot purchase seperately. - more info	$29.99
	LOB114 - Drum support bracket - more info	$14.99
	LOB132 - Motor 24 volt - more info	$39.99
	LOBB102 - Reservoir pan. if one has a pan with drain plug this is the replacement. this pan no longer comes with a drain plug. if drain plug is leaking replace pan (recommended) or us new pan liner (part #169) (this is not recommended-but might work). limit stock on this pan lobb102 going no longer available when out of stock. - more info	$39.99
	LOBB111 - Mounting nuts - more info	$0.50
	LOBB117 - Flush arm. sorry this item is no longer available. - more info	$0.00
	LOBB188 - Water feed valve assy kit includes 149 rubber grommet and 146 float valve orfice which are not available seperately. this replaces water feed valve assembly 170 and 171. no longer comes with brass treads, now plastic. - more info	$38.70
	View all our filters and parts for this model

	Lobb Water saver :
	Parts available for this model:
	136 - Saddle valve assy kit - more info	$9.99
	156 - Transformer - more info	$32.25
	157 - Humidistat - more info	$36.87
	701 - 6.00 dia starting collar - more info	$3.15
	708 - Drip valve assy. 2 gal. per hour (not adjustable) - more info	$25.80
	709 - 12 x 12 ployethylene elbow black nla - more info	$0.00
	712 - Phillps mach screw nla - more info	$0.00
	713 - Hex nut nla - more info	$0.00
	730 - Pan liner - more info	$13.50
	732 - Wsha pan liner also is 730 - more info	$13.50
	801 - Cabinet - more info	$30.00
	802 - Side cover plate - more info	$9.38
	806-T - Distribution tray assy - more info	$28.50
	821 - Brass insert nla - more info	$0.00
	825 - Compression union nla - more info	$0.00
	828 - Solenoid mounting screw nla - more info	$0.00
	830 - Brass ferrule nla - more info	$0.00
	832 - Brass compression nut nla - more info	$0.00
	834 - Brass male pipe thread adapt - more info	$1.05
	836 - Plastic furrule nla - more info	$0.00
	840 - Brass filter adapter nla - more info	$0.00
	846 - Water line filter nla - more info	$0.00
	870 - Hex head sheet metal screw nla - more info	$0.00
	L710 - Waha drip valve assy 1 gal per hr (not adjustable) - more info	$24.00
	LOB800-T - Complete repair kit. please email for price - more info	$0.00
	LOBB800 - Cover - more info	$30.00

Lobb Parts: